免费av在线观看

 Ball screw manufacturer

Product classification

contact us

Company name: Nantong Gaorun Machine Tool Accessories Co., Ltd

Contact person: Mr. Chen

Tel: 0513-83697868

Fax: 0513-83697868

Mobile phone: 1396268

         18012236066

Email: ntgrjc @ 163.com

Address: No.8 Weizhi Road, 300m north of xiaohuaqu, Qidong City

Website: zuiqiushi.com

Key words: Ball Screw Company

Your current location: home page >>Whole station search
Search results: 0 products, 82 news, 0 cases, 0 recruitment , downloads: 0

    Journalism

  • [ Company news ] How can ball screw companies increase the availability of ball screws

    Only a few suppliers around the world produce these precision components, and there is limited overlap between product lines in terms of mechanical properties such as flanges, hole patterns, etc. If the parts are not available, it is possible to find accurate direct substitutes from them. Different manufacturers are small. This is a problem faced by first-class semiconductor test equipment manufacturers when the ball screw currently used in their platforms is discontinued
    Release time: April 4, 2019 number of hits: 6

  • [ Company news ] Taylor number representation of characteristic frequency obtained by ball screw company

    In the control design of electromechanical system, it is very important to know the characteristic frequency of the system. They may be constant, but they can vary according to environmental conditions or operating points. A parameter dependent representation of the characteristic frequency of a second-order system with negligible damping is proposed. Starting from the polynomial representation of mass and stiffness matrix, Taylor number representation of characteristic frequency is obtained. As
    Release time: July 2, 2019 number of hits: 53

  • [ Company news ] Ball screw company is suitable for different working conditions

    In this paper, the kinematics of single nut double ball screw is studied. The friction force caused by the ball moving in oil lubricant is considered. The mechanical efficiency with and without oil lubrication is compared and discussed. In 2011, considering the theoretical driving torque, axial load and the orbital angular velocity of the ball, weiheliai proposed another study to calculate the single nut double ball screw at more than 1000r/
    Release time: July 2, 2019 number of hits: 58

  • [ Company news ] Ball screw company, which includes lateral deformation

    Modeling the static load distribution of the ball is useful for the correct design and accurate size of ball screw mechanism (BSM); it is also the starting point of modeling BSM dynamics (such as friction behavior). Usually, the load distribution of low order model is used instead of the high-order finite element (FE) model which is computationally processed. However, the existing BSM low order static load distribution model is not accurate,
    Release time: July 2, 2019 number of hits: 25

  • [ Company news ] Compared with other ball screw manufacturers

    The standard rolling ball screw series are manufactured, assembled and inspected under the constant temperature control of 20 ° C. compared with other ball screw manufacturers, the ball screw company has higher precision and reliability. Our rolling ball screws are manufactured with C5 to C10 lead errors. Our ball screw is made of alloy steel, which has good rigidity and long service life. take
    Press time: February 6, 2019

  • [ Company news ] The ball screw company aligns the ball return pipes with each other

    These nuts need to be transferred from the spindle to the screw without preload. The ball screw company aligns the ball return lines with each other and aligns the coupling handle with the groove in the ball nut. Place the adjusting nut on the coupling. Many coupling threads, spring washers / gaskets and ball grooves should be lubricated before preloading these ball nuts. Position the ball nut in the
    Release time: July 3, 2019 number of hits: 38

  • [ Company news ] Ball screw companies do not need a lot of extra housing parts

    Double row ball screw support bearings are available in standard and heavy versions. Heavy Duty series have larger reference circles for the same shaft diameter and have high rated loads due to larger rolling elements. Both series are loaded with axial force mainly composed of 60 ° contact angle. Rolling bearing rings are matched in such a way that they have accurate lock nuts in the installed state
    Release time: July 3, 2019 number of hits: 30

  • [ Company news ] Ball screw company angular contact ball bearing group

    The IBC angular contact ball bearing sets have been matched to each other during the manufacturing process in order to maintain the preload value of the previous individual bearing in the group and to bear the load uniformly through the bearings in the group. The O-type and X-type arrangement of the two angular contact ball bearings can bear axial loads in both directions. The high axial load in one direction is supported by a series arrangement. With more than two degrees
    Release time: July 3, 2019 number of hits: 35

  • [ Company news ] Ball screw company when removing flat ring from rolling bearing

    Depending on the type, the outer ring (NNU) or the inner ring (N and NN) guides the rolling bearing axially. When the flat ring is removed from the rolling bearing, the rolling element set and cage are held between the flanges. This allows greatly simplified and separate installation of the inner and outer rings. Many double row IBC cylindrical roller bearings are equipped with a outer ring with three holes (named W33, arranged as
    Release time: July 3, 2019 number of hits: 45

  • [ Company news ] Ball screw company and mating thread will not be aligned

    So that the correct journal length is selected for the plate thickness used. Select the appropriate hole size from the table below to obtain the required bushing size. The hole diameter is driven into the sheet. Place the end of the nut sleeve into the hole on the side opposite to the mating surface. So nuts rely on serrations. Align the plate and nut on the same axis. If the nut is not "square" in the hole, the joint will
    April 29, 2019

  • [ Company news ] Ball screw company, this is because of the hardness difference between the ball and the shaft

    Steel production skills have been developed to the extent that the number and size of inclusions can be significantly reduced. However, the cost of these higher quality steels is higher. In general, the better material is purified alloy steel degassed in vacuum. The parts of the ball screw are heat treated at some points in the manufacturing process to strengthen the material. If the heat treatment is too shallow, the service life of the ball screw can be significantly reduced
    Release time: July 4, 2019 number of hits: 24

  • [ Company news ] Ball screw company this is suitable for bearing journals requiring tolerances of several microns

    Maintaining manufacturing also requires strict process control throughout the entire processing and grinding process. Ball screw company this is suitable for bearing journals requiring tolerances of several microns. Due to the required accuracy to obtain reliable accuracy and long product life, ball screw components should be ground in a strictly controlled temperature environment. Even if two interacting parts are manufactured to exact specifications
    Release time: July 4, 2019 number of hits: 56

  • [ Company news ] Ball screw companies, they also tend to have more rebound

    This means that if your motor stalls or stops, your z-axis will not move or fall under its own weight. Ball screw companies also tend to have more bounce, but that's not a problem for the z-axis, because it doesn't change direction and tilts downward due to gravity. When it does change direction, it's quite slow, with little motion and gravity
    Release time: July 5, 2019, number of hits: 36

  • [ Company news ] Actuators on ball screw machine tools

    When the linear speed exceeds 100 inches / second and the load capacity reaches 1000000 pounds or more, the ball screw has shifted to many functions traditionally reserved for hydraulic or pneumatic drive. The cost and simplicity of electromechanical drives and the emphasis on "fly wire" (or "drive by wire") also drive this trend. With the expansion of the application range, it needs to be in the whole spectrum
    Release time: July 5, 2019 number of hits: 49

  • [ Company news ] Ball screw companies can achieve double actuator accessories in a variety of ways

    Each screw and its associated system stands on the other screw and is not affected by the impossible loss of the bearing ball from the other screw. Multiple circuits can be placed in an area defined by a ball nut as an alternative to a single loop loop loop for each screw. Each circuit is assigned a set of ball bearings that are separate from the other circuits. Multiple circuits provide redundancy (as do multiple threads
    Release time: July 5, 2019, number of hits: 51

  • [ Company news ] Ball screw companies are often used as drive mechanisms in horizontal or vertical drive applications

    The guide screw is a screw that converts the rotary motion into a linear motion. Ball screw companies are often used as drive mechanisms in horizontal or vertical drive applications, and linear guides are used for support. They are described by diameter and spacing. Pitch or lead is the amount of stroke you get, or the distance the nut travels along the screw at each complete rotation. They can be operated manually or electrically. Normally
    Release time: July 5, 2019, number of hits: 55

  • [ Company news ] Ball screw company called chuck workpiece clamping device

    Surface grinding is used to produce a smooth surface on a flat surface. This is a widely used abrasive machining process, in which a spinning wheel covered with coarse particles (grinding wheel) cuts metal or nonmetallic material fragments from the workpiece to make its surface flat or smooth. The surface grinder consists of grinding wheel, workpiece holding device called chuck by ball screw company and reciprocating or rotary table. Chuck is adding
    Release time: July 6, 2019 number of hits: 76

  • [ Company news ] Ball screw companies to meet the needs of specific applications

    Many positioning worktables driven by ball screw can be used as reliable positioning mechanism in many applications such as semiconductor manufacturing equipment and mechanical equipment. Our Tu precision positioning table is a thin and compact positioning mechanism with U-shaped track and sliding table. The table is located in the track track, as part of a complete linear motion rolling guide assembly, which is designed to have two
    Release time: July 7, 2019 number of hits: 73

  • [ Company news ] Ball screw companies include

    When you think of servo motors, you usually think of rotary servomotors. There are three types of rotary servo motor, ball screw company includes: AC servo motor, brushless DC servo motor and DC servo motor. The motion of a rotary servo motor is usually converted to linear motion by using thread (guide screw or ball screw) or by using belt and pulley. Rotary AC servo motor
    Release time: July 8, 2019 number of hits: 53

  • [ Company news ] Ball screw bearing ball is not sliding friction

    The service life of the ball screw varies according to the rated rating, actual load, many impact loads and application speed. If the target life is achieved, the size and characteristics of the ball screw can be adjusted to achieve the desired life. The ball screw consists of screws and nuts and balls operated in a manner similar to that of a bearing. They work together to deliver a power screw similar to a traditional one
    Release time: July 8, 2019 number of hits: 39

  • [ Company news ] The ball screw company allows ball bearings to be placed in 34 of these races

    The screws and nuts on the ball screw have matching screw grooves, and ball screw companies allow ball bearings to be re - and usually semicircular in these races to accept spherical ball bearings. The guide screw uses deep screw thread and matching nut, which is usually made of polymer composite or bronze. The rolling characteristics of the ball screw result in the sliding friction related to the guide screw. Each
    Release time: July 8, 2019 number of hits: 38

  • [ Company news ] How to convert ball screw into linear motion

    This means that the user can view load changes loosely on a custom scale that shows the range of operations required. Then, they can decide when they need to retighten. This greatly reduces the need for expensive downtime to re tension in remote applications. Our load indicating fasteners come in various shapes and sizes. They can be made of standard or special materials. each
    Release time: July 20, 2019 number of hits: 41

  • [ Company news ] How to automatic transmission and reducer of ball screw company

    Although problems may arise from additional friction, inertia, or drastic load changes in the actuator's short-term operation, they provide long service life by stopping overload. And helps to reduce the speed and torque ratio of gears. Clutch and brake are common components in automation system. An electromagnet is a device used to connect a motor to a load. implement
    Release time: July 20, 2019 number of hits: 31

  • [ Company news ] Does the ball screw linear bearing itself move along a single axis

    The case can be set to do the opposite operation and increase the shaft speed by reducing the torque. Closed drive, also known as drive and has two main configurations: in-line and right angle, using different types of drives. The on-line model usually consists of helical or spur gears, planetary gears, cycloidal mechanisms or harmonic generators. Right angle designs are usually worm or drive, but are also available
    Release time: July 20, 2019 number of hits: 23

  • [ Company news ] How to connect the platform and base of ball screw company

    The positioning slider or linear platform is composed of platform and base. The platform and base of ball screw company are connected by guide device or linear bearing to limit the platform to a single translational motion axis. The position of the platform is usually controlled by some form of linear actuator, usually the guide screw through the guide nut in the platform. Although manual control depends on the control knob and guide screw, it can be used for
    Release time: July 20, 2019 number of hits: 25

  • [ Company news ] How to design the drive of ball screw company

    Basic components include actuators (e.g., electric, pneumatic cylinders or pumps), mechanical, motion controllers, feedback devices, specialized software, and amplifiers or drivers. The terms driver and amplifier are interchangeable. The driver is very important for motion control because it determines how to generate the current to manage the actuator. The driver gate receives a low current analog voltage from the motion controller
    Release time: July 20, 2019 number of hits: 25

  • [ Company news ] Ball screw company and industrial robot

    The powertrain can be built around one or more synchronous actuators that convert input energy into output motion. The mechanical actuator converts the rotation of the control handle or knob into linear motion through attached gears or other configurations. Motion is produced by rotating and linearly moving the axis, which rotates the wheel to move the cable. Other types include pull actuators, such as
    Release time: July 20, 2019 number of hits: 26

  • [ Company news ] What materials are the electromagnets of ball screw company made of

    These devices are designed for linear, rotational or mixed motion with different mounting features and orientations. From tachometers to Hall sensors, encoders and resolvers, feedback sensors can eliminate transmission errors and prove good control. Visual systems can also provide feedback, from simple sensors to well-designed visual systems, with industrial cameras for image capture and for analysis
    Release time: July 20, 2019 number of hits: 26

  • [ Company news ] What is the myopia angle of ball screw company's market positioning

    Full sensor and light curtain and other machine protection and production can prevent personal injury when working on or near the operating machine. Thermal control products can provide high temperature equipment, components or system protection, while high system efficiency. Business system can help you determine the system that suits you. These automatons can design, customize, build, install, program, and provide training and maintenance for your system or machine. They can
    Release time: July 21, 2019 number of hits: 30

  • [ Company news ] The precision ball screw company report aims to study the manufacturing methods of the participants

    The precision ball screw report aims to study the participants' manufacturing methods, production costs, pricing strategies, value chain, maintenance costs, capacity utilization, raw material sources and their geological footprints. The main goal of this precision ball screw is to help users understand the definition, classification, market power, impact trends and obstacles facing the market. In preparing the research documents, we do
    Release time: July 21, 2019 number of hits: 28

  • [ Journalism ] Many ball screw companies have larger ball bearings

    Engaged in small ball screw repair and reassembly service, ball screw pair features reduce the customer's machine downtime to a relatively low level. We have many larger ball bearings from Ball Screw Companies in the world, with increments of. 0001 inches. Most of them are suitable for many standard sizes of metric and English ball bearings. This has led to reloading or minor repairs to ball screws from many manufacturers
    Release time: May 26, 2019 number of hits: 26

  • [ Journalism ] How does ball screw company reduce grinding speed

    When the team of engineers investigated the enlargement of the horizontal threaded surface of the shaft, the tiny feature they observed was about half a millionth of a millimeter, roughly the same wavelength as blue light. As the grinding wheel moves to the shaft, the vibration of the grinding wheel will obviously produce a section. The team concluded that they were the main cause of the annoying noise; they noticed that the noise incident peak was associated with the surface's
    Release time: July 1, 2019 number of hits: 47

  • [ Journalism ] Nantong ball screw company, it has nine different models

    The linear guide bearing system and high quality construction make eco225sl an attractive solution for normal operation applications. Unlike the competitive sport phase of, eco225sl can be integrated into complex machines that will run and pass through other machine components. For cost-effective applications, the eco225sl series includes a variety of nemas
    Release time: July 1, 2019 number of hits: 38

  • [ Journalism ] Ball screw the ball screw can be driven in reverse direction due to its low internal friction

    This can be achieved by using rubber or leather bellows to or partially surround the working surface. Another solution is to use the positive pressure of filtered air when they are used in semi hermetic or open enclosures. While reducing friction, the ball screw can operate under some preloads, effectively cleaning the gap (slope) between input (rotation) and output (linear motion). When it
    Release time: July 1, 2019 number of hits: 66

  • [ Journalism ] Ball screw nut assembly table in fastener industry

    In many industries, nuts need to be assembled to studs, bolts and other items prior to shipment. Often, the number of these items makes manual assembly cumbersome or impractical. In this case, the nut and bolt assembly machine can speed up the assembly process. Ball screw nut assembly tables are commonly used in the fastener industry to assemble to nuts, bolts, bolts before shipment
    Release time: July 4, 2019 number of hits: 37

  • [ Journalism ] Each ball screw company has a matching spiral groove

    Once fixed, tighten the nut using a common torque wrench. The size and shape of the torque nut assembly (suitable for external size and shape, internal thread density, internal thread spacing, etc.) can be used with many threaded fasteners. The material used to make the torque nut assembly does not need to be made of metal because it can be made of rigid plastic, and the ball screw assembly consists of screws and nuts,
    Release time: July 4, 2019 number of hits: 29

  • [ Journalism ] Ball screw company makes model comparison with maintenance free lubrication system

    Ball screw contact information in typical wood processing applications, wood particles stick to the ball screw, which may require a different seal to prevent contaminants from entering the ball nut. Another application may require the ball screw to be placed in the reach position, and ball screw companies have made models with maintenance free lubrication systems more popular. Tell your ball screw manufacturer that you
    Release time: July 4, 2019 number of hits: 62

  • [ Journalism ] Corrosion and discoloration of ball screw company

    Chromium balls contain a high proportion of key alloy metals, including chromium, silicon and manganese. Chromium has toughness, ball screw corrosion and discoloration; silicon and manganese both increase strength. Precision microspheres are balls less than 1 / 8 inch (3 mm) in diameter. Precision microspheres are commonly used in dental and optical instruments, micro bearings, ball screws and pumps. Material selection includes chrome steel, stainless steel, carbon
    Release time: July 5, 2019 number of hits: 31

  • [ Journalism ] What is the PV coefficient mentioned earlier by ball screw company

    There is no reliable closed form solution to calculate the life of the guide screw, because friction and wear may be nonlinear. A single wear factor usually predicts the performance of the guide screw assembly throughout its life. Life is estimated through case studies under controlled operating conditions. When the combination of load, speed and duty cycle exceeds the limit, the fault is predictable and will occur. For
    Release time: July 7, 2019 number of hits: 36

  • [ Journalism ] Application of ball screw company for accuracy and performance requirements

    The service life of the ball screw varies according to the rated rating, actual load, many impact loads and application speed. If the target life is achieved, the size and characteristics of the ball screw can be adjusted to achieve the desired life. The main difference between the ball screw and the guide screw is the way in which the load is carried. Ball screws use ball bearings to reduce friction to a greater extent
    Release time: July 7, 2019 number of hits: 39

  • [ Journalism ] One method of ball screw company is to use ball with the required backlash diameter

    The nut has an inner groove as the outer ring, while the screw has a precision grinding or rolling spiral groove as the inner ring. The precision steel ball is between the two grooves, causing the screw or straight line to rotate while the other thread moves linearly. Ball screw efficiency is screw, while providing a simple system. They are also simpler than pneumatic or pneumatic systems. Cost efficiency is inferior to belt
    Release time: July 8, 2019 number of hits: 73

  • [ Journalism ] Ball screw company uses deep screw thread

    The ball screw can be driven reversely according to its lead angle. They are generally not suitable for manual feed machines because the stiffness of the servo motor is required for the tool to grasp the workpiece and to automatically feed, that is to say, the tool and the workpiece over feed speed collide or jam together, destroying the linear motion transmission system required for the application of tool motion automation, such as guide screw and ball screw. although
    Release time: July 8, 2019 number of hits: 73

  • [ Journalism ] Advantages and limitations of grinding ball screw company

    Ground and rolling ball screws are almost identical in mechanical applications. However, raceway surfaces that are often similar to conventional machine threads found in typical screw / nut systems differ by the manufacturing process used to produce these features. In addition to the hardened ball bearing which can rotate, the ball screw system also includes two parts: a guide screw with external thread and an internal thread
    Release time: July 17, 2019 number of hits: 39

  • [ Journalism ] Ball screw systems are susceptible to dimensional deformation

    The strength of rolled thread is usually higher than that of grounding thread, which is due to the significant material strengthening caused by large plastic deformation in the material during rolling. Rolling threads are a cost-effective option because they can be manufactured at a medium speed in an automatic mill setting. As the rolling process is considered to be a "secondary" process, it is impossible to correct any manufacturing errors in the rolling thread.
    Release time: July 17, 2019 number of hits: 31

  • [ Journalism ] The cost is usually much lower than grinding ball screw companies

    The rolled thread undergoes a similar surface hardening treatment after rolling because the hardened surface is too strong to withstand the rolling operation. The main disadvantage of this type of post rolling heat treatment is that it may cause rolling deformation due to the unpredictable material expansion inherent in the thread shape. Conclusion the cost of rolling ball screw system is usually much lower than that of grinding ball screw company, and should
    Release time: July 17, 2019 number of hits: 29

  • [ Journalism ] Why does ball screw company have Gothic arched groove profile

    Due to its low friction resistance, the required force is much lower than other systems, so the power consumption is low. Moreover, even in high-speed operation, the heating effect is very small. Even under preload or normal load, the ball and raceway can contact each other at two points in the loading direction, as shown in the figure. This design produces smooth scrolling. The high reliability of the ball screw has strict quality control
    Release time: July 17, 2019 number of hits: 28

  • [ Journalism ] Many ball bearings of ball screw company have infinite contact surfaces

    This reduces lubrication and increases the number of gears and their rails. Over time, this starts the gear / track, and the teeth become separated (increasing clearance), eventually changing the overall accuracy of the table. This is because the system has to stop at the same point again and again. Our ball screw design does not have this problem, because many ball bearings of ball screw company have no such problem
    Release time: July 21, 2019 number of hits: 40

  • [ Journalism ] How does ball screw company change tolerance

    For MDF doors, this is a key technique because it differs from the incisions produced by many rack and pinion and ball screws. Ball screw technology in addition to many guide screw and rack and pinion drives have the swing, dog walk and inaccuracy. For the rack and pinion, there are two motors on the y-axis (long axis) with vertical gears, which can make the final wear of the machine uneven
    Release time: July 21, 2019 number of hits: 37

  • [ Journalism ] Does ball screw drive allow machine cutting

    The ball screw drive allows the machine to apply a large cutting force to the head, allowing the bit to cut multiple materials at a high speed without bending, breaking or twisting. The rack and pinion do not allow uniform cutting force because the router head will apply additional cutting force to the adjacent gear and motor, forcing the other motor to adjust its speed to keep the rack straight because it will have more torque many times
    Release time: July 19, 2019 number of hits: 45

  • [ technical knowledge ] Ball screw company used to talk about ball screw wear

    Although the model of built-in ball screw is close to that of the model in the case of high preload or not, the results obtained from the model are still applicable to the case of high paper preload. An accurate model is used to predict the accuracy loss of the spiral raceway and estimate the remaining life of the ball screw
    Release time: July 2, 2019 number of hits: 36

  • [ technical knowledge ] How to increase the rigidity of ball screw company

    The 40 ° angular contact with high sensitivity is designed to be driven by small friction, while the design does not have high sensitivity and is also rigid. The combination of high rigidity and wide angle and proper balance force can provide high torque and torque. Installation in the design of low ball and single, so even if you need to remove this. Because of the ball holder, when the flower needs a flower shaft, the steel ball will be like the traditional female design
    Release time: July 17, 2019 number of hits: 29

  • [ technical knowledge ] Ball screw company is the main body of ball screw

    This slip is easy to produce but often inefficient; about 40 input power is transferred to the workpiece. In order to improve this idea, the sliding contact has to be replaced by a rolling element. The ball rings again, otherwise they will fall out of the nut. As a result, the efficiency of the current design of the ring ball screw is greater than 90. Dynamic provides high quality ball screw company series, providing activity and performance. As a ball
    Release time: July 17, 2019 number of hits: 30

  • [ technical knowledge ] What are the types of ball screw nuts

    Lead: the nut is in a transfer. I can see that you are moving away from the nut. It is also determined that the straight load nail is, and the computer card is the braking force. This is because for large leads, the load angle is steep; it can hold less weight. Ball diameter: the diameter of ball bearing, which can be pre loaded with 0, suitable for groove. This is used to calculate the diameter of the ball bearing, which will produce a preload of one. And
    Release time: July 18, 2019 number of hits: 32

  • [ technical knowledge ] What end cap does ball screw company use

    End caps: these types of nut doors are used for high lead and multi lead. It retains its use for these types of nuts, as dies are required to produce them, thereby increasing costs. The number of rows per ring is not limited to this type of rerouting, and usually one ring per ring is started to make the whole nut rewind normal. Multiple start threads: multi threaded screws are used for high applications to allow multiple balls with nuts
    Press time: July 18, 2019

  • [ technical knowledge ] What are the key components in the operation of ball screw company

    Block debris brush by blocking: for rolling ball screw, it is contact type, brush off debris from track performance: door is a single nut and combined seal. These seals have special lips to block contaminants while slightly increasing operating torque. These seals are used for particularly dirty work, such as woodworking, welding and automobile manufacturing. Precision is ball screw company operation
    Release time: July 18, 2019 number of hits: 35

  • [ technical knowledge ] What type of lubrication does the ball screw company use

    There are several different ways to add preload: select a ball larger than the groove, select a nut smaller than the screw, select a screw larger than the female, use two nuts to merge into a wedge, and two nuts to incorporate into the eccentric groove in the spring nut. Ball screw assembly: ball screw so that the shaft can rotate. Usually this involves rollers and retaining brackets. Some longer screws are required to support the critical
    Release time: July 18, 2019 number of hits: 18

  • [ technical knowledge ] Does ball screw company need regular maintenance

    Ball screws are generally not used in applications requiring less than the diameter of the ball. This type of movement removes the lubrication layer and causes an increase in errors. This can be solved by using smaller ball screws and special grease. This is the key to the ball screw life. Actual life depends on load, speed, lead and screw
    Release time: July 18, 2019 number of hits: 15

  • [ technical knowledge ] Ball screw components are applied

    The ball nut is used for adding large ball nuts. Nominal diameter - thread diameter "top"; large diameter oil lubricant of screw is a kind of high viscosity pitch nut, a kind of female can ring ball, which is suitable for the diameter of small guide and small screw profile - diameter pre loading through ball axis - tightness of nut and shaft, deformation of involved parts caused by elasticity. Common nut types, it
    Release time: July 18, 2019 number of hits: 19

  • [ technical knowledge ] What is the installation form of ball screw company

    Bearing ball transfer units are available in high quality or stainless steel components, as well as nylon ball assemblies. Possible combinations include all stainless steel and steel case with stainless steel ball. All units can provide nylon ball. Customers play an important role in providing pillow block bearings for agricultural machinery, conveying equipment and construction machinery. They include deep groove ball bearings sealed on both sides and spherical outer diameter
    Release time: July 18, 2019 number of hits: 18

  • [ technical knowledge ] Ball screw company aims at the diversified needs of customers

    These foot bearings are designed to withstand a wide range of axial load requirements of ball screw customers. When we load the bearing, it is aligned in a plane parallel to the shaft. Because of its higher quality, solid structure and long service life, these products are favored by customers. Provide qualitative classification of deep groove ball bearing one of the known brands. These bearings are widely used as radial bearings,
    Release time: July 18, 2019 number of hits: 20

  • [ technical knowledge ] Ball screw linear bearing and guide assembly

    Our staff only use high vacuum degassed chromium alloy steel wire made by imported EAF. In addition, all steel wires are strictly tested before they are approved for use as basic raw materials. In addition, steel balls are carried out in special continuous furnaces, which are managed under strict process control. The ring ball and guide assembly includes a bracket on the rail. The device is equipped with a full set of ball guiding system
    Release time: July 14, 2019 number of hits: 25

  • [ technical knowledge ] Heat treatment and grinding products of ball screw company

    This ensures a high impact load. As shown in the figure, high precision, due to the Gothic arch groove, it is easy to fix the main roller. In this way, the groove can be measured easily and accurately.) It is easy to operate, and all aspects are considered in the design. The balls are held in the retainer so that they do not fall out when the ball sliders are withdrawn from the guide rail) a wide range of models and sizes are available in each series to make
    Release time: July 14, 2019 number of hits: 25

  • [ technical knowledge ] Ball screw company adopts raw material design

    It is often designed to allow linear motion and rotation. These products use ball screw industry, using quality raw materials and new technology design. In addition, these products are strictly tested on the parameters to ensure the defects. Due to its solid structure, excellent quality and firm structure, these products are appreciated by customers. Ball screw is designed for heavy duty applications. These bearings have two symmetrical rows
    Release time: July 18, 2019 number of hits: 29

  • [ technical knowledge ] Ball screw bearings are made of many materials

    The indication line on the receiver can directly indicate the deviation or misalignment of the belt. The line reflects back to the transmitter, showing any horizontal misalignment between the two pulleys. Deep groove thin bearing with reduced shoulder on one side of inner / outer ring raceway. The cutterhead assembly allows the use of a one-piece circular bag ring separator and a large ball supplement. A-type bearings require thrust to establish contact angles. library
    Press time: July 14, 2019

  • [ technical knowledge ] How to make the ball screw have good rigidity and precision

    It consists of a ball screw and a roll, as with a roller. The surface ball bearing between the ball screw and the nut forms the rolling of the ball bearing. Ball screw ball screw is an effective feed, ball rolling between the screw shaft and. Compared with the traditional one, the driving torque of the product is one third or less, which makes it suitable for saving the power of driving motor. And the connection between balls, nuts and screws in these grooves. When the nut rotates
    Release time: July 19, 2019 number of hits: 27

  • [ technical knowledge ] What is the lubricator factory of ball screw company like

    Thread error to 0.000010 ", including drunkenness. Each screw "runs" with its own nut. The integral phosphor bronze open nut with pre installed nuts can be adjusted by itself. The half response average lead of the nut with radial preload further reduces the residual one turn screw error. The improved design achieves increased axial stiffness and clearance. . self aligning thrust bushing retainers
    Release time: July 19, 2019 number of hits: 29

  • [ technical knowledge ] How to start ball nut for ball screw company

    Part ball bearings provide smooth, low friction travel in applications requiring high speed, positioning and repeatable movement. They are also known as single start ball screw companies and nuts, and they have a single thread of one thread length. Compared with fast range ball screws and nuts, they have larger torque. For compatibility, select components with the same thread direction and size. Ball nut with tube
    Release time: July 19, 2019 number of hits: 27

  • [ technical knowledge ] How ball screw bearings provide smooth low friction travel

    Ball screw bearings provide smooth low travel in applications requiring high speed, positioning and repeatability. Ball bearings in the Division provide smooth stroke in applications requiring high speed, fine positioning and repeatability. They are also known as single ridges. A set of balls reduces friction and holds the ball or guide screw in place, compared to fast-moving ball screws and nuts
    Release time: July 19, 2019 number of hits: 34

  • [ technical knowledge ] How does micro ball screw achieve this kind of movement

    Nuts shall be installed using bolt holes in the flange. These two cylindrical nuts are inserted into them to apply preload. The nut shall be installed by clamping the keyway on the outside of the nut and on the nut face. Because the shaft has right-hand thread and left-hand thread, it has two-way function. The single female with flange is chemical, but sleeve type female can also be made. In addition, two pairs of mother pairs can be used
    Release time: July 19, 2019 number of hits: 25

  • [ technical knowledge ] The compactness of the ball screw company helps to reduce the number of pieces and save space

    The company produces miniature (less than 16 mm in diameter), so it is good at making the whole device compact. From fine (0.5mm) to high (30mm) series products can be widely used, from high speed and high acceleration to precise positioning. It is not standardized selection, and can provide the appropriate project as customized project according to the requirements. We provide technical support and calculation to meet customer needs
    Release time: July 20, 2019 number of hits: 20

  • [ technical knowledge ] New ball screw company with ball spline

    Linear actuators are equipped with hollow motors and are working with motor manufacturers to develop our miniature ball screws or our new ballscrew company with ball splines. The outer diameter of the ball nut is larger than that of the guide screw nut, so large motor hollow hole is required. At this time, we designed the motor with large hollow hole without low torque, and combined with our ball spline ball
    Release time: July 20, 2019 number of hits: 24

  • [ technical knowledge ] When does ball screw company tighten again

    The custom scale can use the green area to display the desired operating range or the fixture load value with the correct positioning. The load indication system provides high integrity and availability in bolted connections. They act as a constant barometer of bolted connection integrity, providing additional protection for workers in hazardous environments. The load monitoring equipment is sealed, subjected to harsh environment and inundation, and can be applied to - 40 ° of
    Release time: July 20, 2019 number of hits: 23

  • [ technical knowledge ] High rigid precision positioning table of ball screw company

    The built-in lubrication component can guarantee long service life and maintenance free operation. Ball screw company high (our inaccurate and adjustable positioning mechanism, with sliding table and cast iron bed, has high rigidity and excellent vibration damping performance. The parallel design of two groups of linear mode ensures high stability and high load capacity. There are four sizes to choose from. The width of the worktable is 120-420 mm linear mode
    Release time: July 21, 2019 number of hits: 39

  • [ technical knowledge ] What are the structural tubes in the ball screw company series

    The series adopts integrated steel pipe frame structure, with large-scale steel pipe gantry design and steel pipe column. Frame and gantry components are milled on the bed to match tolerances and reduce stress, ensuring accuracy and accuracy from scratch. Our series of routers have a solid structure and can handle large projects. They are also driven from the X and y-axis drive systems
    Release time: July 21, 2019 number of hits: 33

  • [ technical knowledge ] Positioning table driven by ball screw company

    A positioning table driven by ball screw company is designed and manufactured, which can be used as a positioning mechanism in semiconductor manufacturing equipment and mechanical applications. Positioning table our positioning table is a thin and compact positioning mechanism with U-shaped track and sliding table. This industry design can achieve high degree and high rigidity even under fluctuating and complex loads. Six sizes available, rail
    Release time: July 19, 2019 number of hits: 38

  • [ technical knowledge ] What kind of precision ball screw drive mechanism

    Compact precision positioning table (TS) our compact precision positioning table has low cross-section, high availability and precision, using cross roller as rolling guide mechanism. The high rigidity damping slide table and cast iron bed are composed of drive mechanism of precision ball screw company. Both single axis (TS) and dual axis models can be used for degree positioning applications, such as precision measuring instruments and assembly systems
    Release time: July 21, 2019 number of hits: 14

  • [ technical knowledge ] Ball screws are available in various styles and sizes

    Rigid linear guides for high load capacity our heavy duty ball and roller shafts withstand high loads and contamination in many machining applications. Our solid linear bearings range from 8 to 85 mm and are suitable for all kinds of machine tools - from small three axis machines to five axis centring which can handle large and heavy parts. Linear guide rail and positioning table can realize fast and precise movement. Thanks to our
    Release time: July 21, 2019 number of hits: 18

  • [ technical knowledge ] Ball screw company is suitable for application without rust oil

    Cylinder length options are available in standard and high rigid long versions, providing design activity. The diameter of spline shaft in six models is 4 to 12mm. Our lightweight Mini Guides have built-in lubrication. The device does not contact the track and can realize smooth movement without increasing rolling resistance. It is made of corrosion-resistant stainless steel. This makes the ball screw company suitable for use without rust
    Release time: July 21, 2019 number of hits: 19

  • [ technical knowledge ] Ball screw company provides an economic choice for mass production of products

    Shell type needle roller bearings are lightweight, thin moving parts designed to handle high speed or heavy loads, depending on the configuration. The outer ring made of stainless steel gives the streamlined profile the low profile of a needle roller bearing. There are two types of shell type bearings available - cage and full-length bearings: cage bearings for high-speed rotation with accurate needle rollers and fine guide by cages and thrust rings. For overloading
    Release time: July 19, 2019 number of hits: 18

  • [ technical knowledge ] The development of the company's ball screw brings efficiency

    Cage roller bearings are designed for high speed and variable loads. Due to the axial distance between the two rollers, large torque is supported. Optional synthetic rubber seals prevent dust penetration and grease leakage. Full loaded roller bearings handle low speed rotation, swing motion and heavy loads. Supports moment loads similar to cage design. Optional seals are available on both sides. Double row roller bearings are used for pulleys
    Release time: July 21, 2019 number of hits: 20

  • [ technical knowledge ] DC motor controller of ball screw company

    You can use this information to create a closed loop position controller. The input is similar to the port opened in mode, which reads into the proportional sensor. This is often useful for motors with attached actuators, such as DC linear actuators, so you can integrate position feedback without having to purchase additional input boards. High compatibility, there are a variety of brush DC motor: electromagnet motor, No
    Release time: July 19, 2019 number of hits: 96

  • [ technical knowledge ] Ball screw is designed to read encoder pulses

    In this case, you need to connect to confirm the motor position. It is a compact and accurate device, which can measure the rotation speed of an object. A common application is to connect it to the motor shaft to track the relative position of the motor. Through proper calculation, the information can also be used for fixed angular velocity and acceleration. The device connection is the circuit board used by the gate meter to read the pulse of the reader and convert it into a device. Sensing
    Release time: July 19, 2019 number of hits: 21

Welcome to leave us a message
Please enter the message here, we will contact you as soon as possible.
full name
contacts
Telephone
Landline / mobile number
mailbox
mailbox
address
address